How To

Download OxygenOS 3.5.6 For OnePlus 2 -Fix Network Drops Issue

OnePlus 2 owners will soon be able to download the OxygenOS 3.5.6 update, fixing the persistent network drops issue. This update comes shortly after the 3.5.5 version was released, as many users were reporting this problem. If you’re among them as well, you should know that the manufacturer is currently rolling out this update over-the-air, in a phase-wise manner. However, if you don’t want to wait until you receive the official notification, you can install it manually, using the instructions below.

 

Before applying the update, here are a few aspects you should really consider, if you want everything to go smoothly:

  • This OxygenOS 3.5.6 update is just for the OnePlus 2, so don’t try installing it on another device, since it won’t work.
  • The update won’t erase the data on your phone, but our recommendation is to perform a complete backup before starting, in order to avoid any unpleasant situations.
  • Make sure that your battery level is between 50 and 60%, otherwise you risk dealing with an accidental shutdown.
  • Please follow the instructions below carefully!

 

 

Download OxygenOS 3.5.6 For OnePlus 2

OxygenOS 3.5.5 To OxygenOS 3.5.6 OTA – Download

OxygenOS 3.5.6 Full ROM For Oneplus 2 – Download, Mirror

 

 

Install OxygenOS 3.5.6 On OnePlus 2

 

 

Method 1

Step 1: Go to Settings > About phone and search for the Build Number. Then, tap it seven times, in order to activate Developer Options.

Step 2: After activating the Developer Options menu, enter it and enable the USB Debugging option.

Step 3: Download the ADB and fast-boot driver and install it on your PC.

Step 4: Download the OxygenOS 3.5.6 for OnePlus 2 ROM from above and copy it in the same folder where you installed ADB.

Step 5: Turn off your phone and boot it into Recovery Mode.

Step 6: Choose the Install from ADB Sideload/USB option.

Step 7: Connect your phone to a laptop or PC.

Step 8: In the folder where you have the ROM, press shift and right click, in order to open a command.

Step 9: Type adb devices, in order to check your connection. If your phone is listed, it means you can start flashing the ROM.

Step 10: Type adb sideload File Name.zip in order to begin flashing. It shouldn’t take more than 10 minutes.

Step 11: Reboot your phone.

 

Method 2

Step 1: Download the OxygenOS 3.5.6 for OnePlus 2 .zip file, using the link provided above, and save it on your phone’s internal storage.

Step 2: Turn the phone off and boot it into Recovery Mode, by pressing and holding Volume Down and the Power button.

Step 3: Wipe all your data and cache, if you prefer a clean install. This step can be skipped otherwise.

Step 4: While in Recovery mode, select your preferred language and then, pick Install from Local.

Step 5: Select the .zip file and press install, in order to begin the process.

Step 6: Wait for about 10 minutes, until the installation is complete, and then, reboot your phone.

 

And this is everything you have to do! You have successfully installed OxygenOS 3.5.6 on OnePlus 2 on your phone. If you have any questions about this process, feel free to contact us, using the comments section below.

Comments
To Top
Close
Please support the site
By clicking any of these buttons you help our site to get better