How To

Download MIUI For Redmi 4 Prime – Global Stable ROM

If you’re planning to update Redmi 4 Prime to MIUI, you’re in the perfect place, as we have a good news for you! The update is currently rolling out via OTA, but for those of you who can’t wait to receive the notification, we’ve also put together a quick guide on how to do it manually.

The MIUI Global Stable ROM for Redmi 4 Prime has a total size of 1.2 GB and brings several fixes and improvements, not to mention that it’s very easy to install, as long as you follow the steps listed below.

On the other side, our recommendation is to first check for the update. Go to Settings > About Phone > System update and tap Check for update. If it’s not available yet, you can download MIUI For Redmi 4 Prime and update the phone manually.


Important  Notes


Before proceeding with installation, here are a few aspects you should consider, in order to avoid any issues:

  • This update is just for the Xiaomi Redmi 4 Prime, so don’t try installing it on another device, since it won’t work.
  • The updating process may erase your data, so our recommendation is to perform a full backup before starting, so you can avoid an unpleasant situation.
  • Please check your battery level before starting and make sure it’s at least 50-60%, otherwise you risk dealing with an accidental shutdown.
  • Please follow the instructions below correctly!



Download MIUI For Redmi 4 Prime – Global Stable ROM



Download MIUI Recovery ROM For Redmi Note 4 Prime – Download


Download MIUI Fastboot ROM For Redmi Note 4 Prime – Download




Install MIUI On Redmi 4 Prime – Global Stable ROM



Method 1 – Recovery Mode

Step 1: Download  MIUI for Redmi Note 4 Prime File From above and save it on your phone.

Step 2: Launch the Updater app from your phone.

Step 3: Click on the three-dot menu from the top-right corner and select the “Choose Update Package” option. Select the MIUI Global Stable ROM for Redmi 4 Prime file.

Step 4: Wait until the process is completed and your phone reboots. It shouldn’t take more than 10 minutes.


Method 2 – Fastboot Mode

Step 1: Download Mi Flash Tool, and install it on your PC.

Step 2: Download MIUI Fastboot ROM From Above.

Step 3: Boot your device into Fast-boot mode by turning it off, then pressing and holding Volume Down and the Power button.

Step 4: Connect your phone to your PC, through a microUSB cable.

Step 5: Extract the Fastboot ROM and copy the path on the PC.

Step 6: Open Mi Flash Tool and paste the path in the address bar. Then, hit ‘Refresh’, followed by ‘Flash’.

Step 7: Wait until the process is completed. It shouldn’t take more than 10 minutes. After it’s done, your Redmi 4 Prime will boot to the latest MIUI version,


And you’re all done! You have successfully managed to install MIUI on Redmi 4 Prime. If you’re experiencing any issues, please contact us, using the comments section below.


To Top
Please support the site
By clicking any of these buttons you help our site to get better