The Redmi Note 3 keeps receiving updates, in order to improve the overall system performance of the handset! Recently, Xiaomi started rolling out the MIUI 188.8.131.52 Global Stable ROM over the air, totalling 90MB. Soon enough, users will receive the notification and be able to install it, but if you can’t wait until this, you can also manually install it!
MIUI 184.108.40.206 ROM for Redmi Note 3 comes as the successor of MIUI 220.127.116.11, its changelog including optimized system performances. If you’re planning to install it on your phone, you can find a complete guide on how to do it below.
Warnings & Requirements
- This method works solely for the Snapdragon 650-powered Redmi Note 3. Don’t try it on other devices.
- The process will erase all your data, so it’s recommended to perform a full backup before starting, in case anything goes wrong.
- Make sure that your Redmi Note 3 has a battery level above 60%. Our recommendation is to start with a fully charged battery, in order to prevent an accidental shutdown.
- Follow all these steps correctly, otherwise you risk bricking your device.
Download MIUI 18.104.22.168 ROM For Redmi Note 3
Install MIUI 22.214.171.124 ROM On Redmi Note 3
In order to perform the updating process, your phone needs to be rooted and have TWRP Recovery installed.
Step 1: Download the MIUI 126.96.36.199 Global Stable ROM for Redmi Note 3.
Step 2: Download and install the Mi Flash Tool on your PC.
Step 3: Turn off your phone and power it on in Fast boot mode, by pressing the Volume down key and the Power button at the same time.
Step 4: Connect the Redmi Note 3 to your PC, using a USB cable.
Step 5: Go to the ROM zip file you just downloaded and decompress it. Copy the complete path of the ROM.
Step 6: Open the Mi Flash tool and past the copied path in the address bar.
Step 7: Press the refresh button and your device will automatically be recorganized. When it’s detected, click the second button, Flash.
Step 8: Flashing MIUI 188.8.131.52 Global Stable ROM for Redmi Note 3 will begin. Wait until the bar is fully green. This process shouldn’t take more than 10 minutes.
And this is pretty much it. You have successfully managed to install the MIUI 184.108.40.206 Global Stable ROM for Redmi Note 3. Like always, if you have any questions or face difficulties throughout the process, feel free to contact us, using the comments section below!