How To

Download Huawei P8 Marshmallow 6.0.1 Firmware (B390) – Full ROM + OTA

If you want to enjoy Android 6.0.1 Marshmallow on your Huawei P8, you’re in the right place, as the latest update, bringing several optimizations and fixes, is now available. The update is rolling out over the air and users should receive the official update notification. However, if you can’t wait, you can also install  marshmallow firmware (B390) for Huawei P8 (GRA-L09 / UL10) manually, just by following the instructions below!

 

Here you can find a short list with some of the new stuff the update brings, as well as the complete firmware information:

  • Improved Google Duo video experience
  • Improved device security
  • Device – Huawei P8
  • Model – GRA-L09/GRA-UL10
  • Android Version – 6.0.1
  • EMUI Version – 4.0.1
  • Firmware – B390
  • Build Number – GRA-L09C432B390/GRA-UL10C432B390
  • Status – Official
  • Type – Full/OTA firmware image

 

Important Note –

 

Before proceeding with installation, please consider the following notices, in order to avoid unpleasant situations or even bricking your phone:

  • Make sure the phone is rooted and has enough free space
  • The firmware is just for the Huawei P8 (GRA-L09 / GRA-UL10). Don’t try installing it on other variants or devices, since it won’t work.
  • The update process may erase your data, so it’s recommended to perform a full backup before starting, so your data stays safe.
  • Check the battery level and see if if has at least 50% of battery left, otherwise you risk dealing with an accidental shutdown.

 

Download Huawei P8 Marshmallow 6.0.1 Firmware (B390)

 

Download the full ROM or OTA file from here, depending on your chosen update method:

  • Download Huawei P8 Marshmallow (B390) OTA for GRA-L09 – Download, Mirror
  • Download Huawei P8 Marshmallow (B390) Full ROM  for GRA -L09- Download, Mirror
  • Download Huawei P8 Marshmallow (B390) OTA for GRA-UL10 – Download
  • Download Huawei P8 Marshmallow (B390) Full ROM  for GRA-UL10 – Download

 

 

Install Marshmallow 6.0.1 Firmware On Huawei P8 (GRA-L09 / UL10)

 

 

Method 1

Step 1: Download the Marshmallow 6.0.1 Firmware (B390) for Huawei P8 (GRA-L09 / UL10) and extract it.

Step 2: Create a dload folder on your microSD card a put the update.app file, extracted at the previous step, over there.

Step 3: Dial *#*#2846579#*#*, in order to open the hidden menu. Once revealed, click on Project Menu > Software Upgrade > SDCard Upgrade.

Step 4: Select the update file and run it. It shouldn’t take more than 10 minutes to complete.

Step 5: Reboot your phone.

 

Method 2

Step 1: Download the stock ROM, using the links above, and extract it.

Step 2: Create a dload folder on your card and copy the update.app file over there.

Step 3:  Turn off your Huawei P8 and press Volume Up + Volume Down + the Power Button, in order to begin the update process automatically.

Step 4: Wait for about 10 minutes and it will be ready.

 

OTA Method

Step 1: Download the full Huawei P8 ROM from above, but don’t extract it.

Step 2: Create a dload folder on your microSD Card and put the file over there.

Step 3: Turn off your Huawei P8 and press Volume Up + Volume Down + the Power Button, in order to begin the update process automatically.

Step 4: Give your phone around 10 minutes to complete this process.

 

And these are the three methods through which you can install marshmallow Firmware for Huawei P8 (GRA-L09 / UL10). If you’re facing any issues, contact us using the comments section below!

Comments
To Top
Close
Please support the site
By clicking any of these buttons you help our site to get better