Download Huawei Mate 9 Nougat B184 Update For Europe (MHA-L09)
How To

Download Huawei Mate 9 Nougat B184 Update For Europe (MHA-L09)

The newest 7.0 Nougat Update for Huawei Mate 9 can now be downloaded, through an official link, so you can update the manufacturer’s phablet to the latest operating system. This is not a major update, but it does bring a couple of camera improvements, like 6x zoom, allowing users to take clearer long distance photos.

The Nougat firmware for Huawei Mate 9 is based on Google’s newest OS and comes with EMUI 5.0 on top. If you want to flash it on your phone, quickly, everything you need to do is follow all the steps presented in the guide below and you should be ready in no time!

 

Firmware Information

 

  • Device – Huawei Mate 9
  • Model – MHA-L09
  • Android Version – 7.0 Nougat
  • EMUI Version – 5.0
  • Firmware – B184
  • Build Number –MHA-L09C432B184
  • Status – Official
  • Type – Full firmware image

 

Pre-requisites

 

Before starting the updating process, please take a few moments and consider the following recommendations, for a hassle-free installation:

  • This firmware is just for the Huawei Mate 9 MHA-L09. Don’t try it on other phone, since it will not work at all.
  • In order to be able to install it, the phone needs to be on stock firmware and stock recovery.
  • The process may erase the data you have on the phone, so it’s better to take a complete backup, just to avoid an unpleasant situation.
  • Check the battery level and make sure it’s around 50-60%, so you can prevent an accidental shutdown.
  • Follow all the steps in the guide carefully!

 

Download Huawei Mate 9 Nougat Update Files

 

 

Install Nougat B184 on Huawei Mate 9

 

Method 1

Step 1: Unlock your phone’s bootloader. If it’s already unlocked, you can skip this step.

Step 2: Download the HWOTA_MHA.zip file, available here – Download, then extract it on your PC or the phone’s microSD card.

Step 3: Download the three files from above and rename them as it follows: “update_data_full_public.zip” To “update_data_public.zip” and “update_full_MHA-L29_hw_eu.zip To “update_all_hw.zip“.

Step 4: Copy the renamed files in the SD card or on your PC, in the C:\..\HWOTA\update folder.

Step 5: Run the update.bat file as administrator. You will be asked if you copied the files, then press any key to continue.

Step 6: Connect the phone to a PC and reboot it into Bootloader mode. This can be done by pressing and holding Volume Down and Power, or by simply using the ‘adb reboot bootloader‘ command.

Step 7: The previous step will install TWRP on your phone. After it’s done, disconnect the cable and turn off the phone, by using Volume Up and Power.

Step 8: After turning off the phone and entering TWRP, plug the data cable again and press Enter on your PC.

Step 9: Type 1 and press enter if the update files are in the HWOTA folder on the microSD card or press 2 and enter if they’re on your PC.

Step 10: You will be asked about the update type, so once again, type 1 and press enter twice. This will begin the installation.

Step 11: Wait for around 10 minutes, until the process is ready.

 

Method 2

 

Step 1: Unlock your phone’s bootloader, in order to proceed to the next step. If it’s unlocked, you can ignore it.

Step 2:  Download Nougat B184 For Huawei Mate 9 from above, and save them on your device.

Step 3: Boot the phone into TWRP Recovery.

Step 4: While in TWRP, flash the update.zip file. Once it’s done, without rebooting, proceed to the next one.

Step 5: Flash update_full_hw_usa.zip and wait for ~10 minutes, until the update is ready.

Step 6: Reboot your phone.

This is how you can install Android 7.0 Nougat on Huawei Mate 9. If you have any questions, please contact us!

We whole heartedly encourage all of you to share your opinions, requests, queries, and any issues regarding our tutorials and other posts among everyone. Please feel free to visit our ObeyGeek forum and speak your mind.