Download Huawei Mate 9 Android 7.0 Nougat Firmware B181 – Australia
How To

Download Huawei Mate 9 Android 7.0 Nougat Firmware B181 – Australia

The latest official Android 7.0 Nougat firmware for the Huawei Mate 9 MHA-L09B – the Australian version, to be more specific – was just made available for downloading, improving the device’s overall stability and performance. Based on the latest EMUI 5.0 OS, it’s currently rolling out over the air, in a phase-wise manner, so it will take a while until all users will receive it.

On the other side, you should know that you can install 7.0 Nougat Firmware (B181) on Huawei Mate 9 MHA-L09B manually, in just a few minutes, if you follow the steps in the guide below. Just make sure that you read the details carefully, without skipping any step.

 

 Firmware Information

 

Here you can find some detailed information about the firmware you’re about to install on your phone:

  • DeviceHuawei Mate 9
  • Model – MHA-L09B
  • Android Version7.0 Nougat
  • EMUI Version – 5.0
  • Firmware – B181
  • Build Number – MHA-L09BC346B181
  • Status – Official
  • Type – Full firmware image

 

Warnings & Requirements

 

Before proceeding with the actual installation process, please consider the following recommendations, in order to avoid dealing with issues or even damaging your phone:

  • The firmware you will install is just for the Mate 9 MHA-L09B, so it won’t work on another variant or another device.
  • Your device should be on stock firmware and stock recovery, otherwise you won’t be able to install the new firmware.
  • The process will erase your data, so our recommendation is to perform a full backup at first, then start the update.
  • Check the battery level and see if it’s around 50-60%, so you can prevent an accidental shutdown, in the middle of the process.

 

Download Huawei Mate 9 Nougat Firmware B181

 

Update.Zip – Download

Update_Full_vha_au.Zip – Download

 

Install 7.0 Nougat Firmware on Huawei Mate 9

Part 1

Step 1: Download the Huawei Mate 9 Nougat Update.zip file from above, then extract it.

Step 2: Create a folder on your memory card and name it dload. After this, copy the update.app file over there.

Step 3: Dial *#*#2846579#*#*. This will reveal a hidden menu, from which you should select Software Upgrade.

Step 4: Start the SDCard Upgrade.

Step 5: Select and run the update.

Step 6: Wait for around 10 minutes, until the installation is ready.

Step 7: Reboot the phone.

 

Part 2

Step 1: Download the update_full_vha_au.zip file for the Huawei Mate 9 from above, then extract it.

Step 2: Go to the dload folder, delete all the data, then copy the new update.app file you’ve just extracted.

Step 3: Dial *#*#2846579#*#* to access the hidden menu.

Step 4: Select Software Upgrade from the menu, then start the SDCard Upgrade.

Step 5: Select and run the update.

Step 6: Wait for the process to complete. It should take no more than 10 minutes.

Step 7: Reboot your phone.

 

And this is pretty much it! If you have any questions, please contact us, using the comments section.

We whole heartedly encourage all of you to share your opinions, requests, queries, and any issues regarding our tutorials and other posts among everyone. Please feel free to visit our ObeyGeek forum and speak your mind.